Remounting Engine - Yamaha XT 600 AC Service Manual

ENGINE ASSEMBLY AND ADJUSTMENT
I
ENG
1"-1
4-75
4. Install :
- Neutral switch lead
CD
5. Install:
-Shaft
CD
-Searing
®
- Starter idle gear 1
@
6. Install:
- Dowel pin
- Gasket
- Cover
CD
(starter idle gear)
Bolts (starter idle gear cover):
10 Nm (1.0 mokg, 7.2 ftolb)
REMOUNTING ENGINE
When remounting the engine, reverse the "EN-
GINE REMOVAL" procedure . Note the following
points.
AWARNING
Securely support the motorcycle so there is
no danger of it falling over.
1. Install:
-Engine
- Pivot shaft
CD
NOTE: ______________________ ___
Apply the grease to the pivot shaft.