Yamaha XT 600 AC Service Manual page 178

~~~~_E_N_G_I_N_E_A_S_S_E_M~B_L_Y_A_N_D~A_D_J_U_S_T_M_E_N_T~IENGI~I
311 ·()Ijl
4-72
NOTE: ________________________ _
Install the clutch plates and friction plates alter-
nately on the clutch boss, starting with a friction
plate and ending with a friction plate.
-The friction plates (type A)
®
with the
larger of the inside diameter must be in-
stalled in the second and last places.
-The wave plate
@
must be placed on the
inside of the second friction plate.
~
Friction Plate
Type "A" Type "8"
Quantity 2 pes.
6 pes.
Inside 116 mm 113 mm
Diameter "0"
14.67
in) 14.45 in)
NOTE : ________________________ _
Align the punched mark
@
on the clutch boss
with the arrow mark on the clutch pressure plate
@.
5. Adjust:
-Clutch (mechanism free play)
Refer to the "CLUTCH ADJUSTMENT"
section in the CHAPTER 3.
6. Install:
-Dowel pin
- Gasket
- Crankcase cover (right)
CD
-a-ring
-Oil filter
-Oil filter cover
®
(with a-ring)
Refer to the "Engine oil rep lacement (with
oil filter)" section in the CHAPTER 3 .
Bolt (crankcase cover):
10 Nm (1.0 m'kg, 7.2 ft'lb)