Yamaha XT 600 AC Service Manual page 295

8."ENGINE STOP" switch
• Disconnect the handlebar switch (right)
lead coupler from the wire harness.
• Connect the pocket tester
(Q
x 1) to the
engine stop switch terminal .
• Check the switch component for the conti -
nuity between "Red/ White
CD
and Red /
White
®".
Refer to the "CHECKING OF
SWITCHES" section.
~
CORRECT
9 . Sidestand switch
• Disconnect the sidestand switch coupler
from the wire harness .
• Connect the pocket tester
( Q
x 1) to the
sidestand switch terminal.
• Check the switch component for the conti-
nuity between " Black
CD
and Black
®".
Refer to the "CHECKING OF SWITCHES"
section .
~
CORRECT
*
IGNITION SYSTEM
I
ElEel1ii
I
7-17
INCORRECT
"ENGINE STOP" switch is faulty, replace
handlebar switch (right).
INCORRECT
l
Sidestand switch is faulty, replace it .