Yamaha XT 600 AC Service Manual page 303

ELECTRICAL STARTING SYSTEM
I
ELECI
iii
I
3. Starter motor
• Connect the battery positive terminal
CD
and starter motor cable
®
using a jumper
lead
@
*
as shown .
• Check the starter motor operation .
~
OPERATIVE
4 . Sta rter relay
• Disconnect the starter relay coupler .
• Connect the battery and frame to the
starter relay coupler, using the jumper lead
CD
as shown.
Battery
(+)
terminal
®
-->
Red/ White terminal
@
Frame
-->
Blue/ White terminal
®
=
• Check the starter motor operation .
~
OPERATIVE
*
7-25
*
AWARNING
A wire for the jumper lead must have the
equivalent capacity as that of the battery
lead or more, otherwise it may cause the
jumper lead to be burned. This check is
likely to produce sparks , so be sure that no
flammable gas or fluid is in the vicinity .
NO OPERATIVE
Starter motor is faulty, repair or replace it .
NO OPERATIVE
1
Starter relay is faulty, replace it .