Charging Method Using A Constant-Voltage Type Charger - Yamaha XT 600 AC Service Manual

_ _ _ _ _ _ _ _ _ _ _

AINDSJP
~1
BATTERY INSPECTION _ _
rz:.-_
Charging method using a constant-voltage type charger
NOTE: _ _ _ _ _ _ _ _ _ _ _ _
Measure the open-circuit
Voltage should be measured 30 minutes
voltage prior to charging.
after the machine is stopped.
YES
Connect a charger and
AM P meter to the bat-
tery, and start charging.
NO
Make sure the current is
higher than the standard
_ - - - - - - 1
1 - - - - - - - - .
charging current written
on the battery .
Charge the battery until the battery's
charging voltage is 16 volts or more
NOTE: _ _ _ _ _ _ _ _ _ _
Set the charging time at 20 hours
(maximum) .
Check the open-circuit voltage
after having left the battery for 30
minutes after charging.
12.8 v or more---Charging is
complete.
12.7 v or less---Recharging is
necessary.
Under 12 v---Replace the battery.
Volt meter
3-51
This type of battery charger can-
not charge the M F battery. A vari-
able voltage charger or a constant
current charger is recommended.
Charger
AMP meter