ENGINE DISASSEMBLY
ENG ' -
4-17
3. Remove:
- Shift shaft # 1
CD
-Shift shaft #2
®
BALANCER AND CRANKSHAFT
1. Remove:
- Balancer
CD
2.
Remove:
-Crankshaft
CD
NOTE: ______________________ ___
e Remove the crankshaft by the crankcase se-
parating tool
®
.
Crankcase separating tool:
PI
N.
YU-01135-A
PI
N.
90890-01135
- Fully tighten the tool holding bolts, but make
sure the tool body is parallel with the case. If
necessary, one screw may be backed out slightly
to level tool body.
OIL STRAINER
NOTE
:
________________________ _
It is recommended that the oil strainer be replaced
whenever the engine is disassembled.
1.
Remove:
- Oil strainer
CD
e Oil passage cover
®
eGasket