Yamaha XT 600 AC Service Manual page 196

5-10
CARBURETOR
ICARBI' I
Primary carburetor
1. Install:
-Jet needle
CD
- Connecting arm
®
NOTE: ________________________ __
Make sure that the connecting arm assembly
CD
is at the illustrated position.
2. Install:
-Throttle valve
3. Install:
-Spring
- Throttle shaft
NOTE: ________________________ __
Set the spring as shown.
4. Install:
-Screw (connecting arm)
NOTE: ________________________ __
Turn the throttle shaft 1 12-turn clockwise to give
preload to the spring and hold it.
Then, install the screw (connecting arm).
Screw (connecting arm):
2 Nm (0.2 m.kg, 1.4 ft·lb)