Brake Pad Inspection - Yamaha XT 600 AC Service Manual

_ __________ IA' N OSJP/-e/
BRAKE PAD INSPECTION _ _
~_
3-34
AWARNING
• Use only the designated quality brake fluid:
otherwise, the rubber seals may deterio-
rate, causing leakage and poor brake per-
formance.
• Refill with the same type of brake fluid;
mixing fluids may result in a harmful chem-
ical reaction and lead to poor performance.
• Be careful that water does not enter the
master cylinder when refilling. Water will
significantly lower the boiling point of the
fluid and may result in vapor lock.
BAKE PAD INSPECTION
1 . Activate the brake lever or brake pedal.
2. Check:
• Pad thickness
Out of specification -> Replace.
Wear limit
@ :
Front:1.0 mm (0.04 in)
Rear:0.8 mm (0.03 in)
Refer to the "BRAKE PAD REPLACE-
MENT"section in the CHAPTER 6 for
replacement .
~
Front brake
[8J
Rear brake