Transmission And Shifter - Yamaha XT 600 AC Service Manual

_ _____________________________
IENG
~I
INSPECTION AND REPAIR _ . - _ .
-----
4-36
TRANSMISSION AND SHIFTER
1. Inspect:
- Shift fork cam follower
CD
-Shift fork pawl
®
Scoring / Bends/Wear --> Replace.
2. Inspect:
-Shift cam groove
CD
- Shift cam segment
®
Wear / Damage --> Replace.
3. Check :
-Shift fork movement
Unsmooth operation
-+
Replace shift fork
and / or guide bar .
4. Inspect:
-Guide bar
Roll the guide bar on a flat surface.
Bends--> Replace.
AWARNING
Do not attempt to straighten a bent guide
bar.
5. Measure:
-Transmission shaft runout
Use centering device and dial gauge.
Out of specification --> Replace bent shaft.
Maximum runout:
0.08 mm (0.003 in)