Yamaha XT 600 AC Service Manual page 67

Table of Contents

Advertisement

___________
IAINDSJPI~1
ENGINE OIL LEVEL INSPECTION
_
_~_
3-17
4. Inspect:
-Oil level
Oil level should be between the maximum
level
CD
and minimum level
®.
NOTE: ______________________ __
- Be sure the motorcycle is positioned
straight
up when checking the oil level.
- When inspecting the oil level, do not screw
the oil level gauge into the oil tank.
I nsert the gauge lightly.
Oil level is
incorrect~Add
the oil up to the
minimum level.
Recommended oil:
SAE 20W40 type SE motor oil or
SAE 10W30 type SE motor oil
5.
Install
:
-Oil tank cap
6
.
Start the engine and warm up until the oil
temperature rises to aporoximately 60'C
(
140'F).
When the oil tank is empty, never start the
engine
.
7. Idle the engine more than 10 seconds while
keeping the motorcycle upright. Then stop
the engine and add the oil to the maximum
level.
8. Install:
-Oil tank cap
-Cover
Oil quantity:
Periodic oil change
2.7 L (2.4 Imp qt. 2.9 US qt)
With oil filter replacement
2.8 L (2.5 Imp qt. 3.0 US qt)
Total amount
3.3 L (2.9 Imp qt. 3.5 US qt)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xt 600 a

Table of Contents