Basic Copying - Fuji Xerox DocuPrint C3290 FS User Manual

Basic Copying

Use either the document glass or the document feeder to make copies. Load the originals to be copied and
follow the steps below to make copies. To clear the settings from the previous job, press the Clear All
button once.
Document Glass
Lift the document feeder or the document glass cover,
and then place the original facedown on the back,
left corner of the document glass.
1. On the control panel, press the Copy button.
2. Enter the desired number of copies using the control panel keypad. The number of copies appears on
the upper, right corner of the display. To reset the number of copies to 1, press the Clear All button.
3.
Set copying options. See
4. Press the Start button.
If you placed originals in the document feeder, copying continues until the document feeder is empty.
Note:
Print jobs are interrupted when users make copies. Printing continues while the printer scans the
originals. When the copies are ready to print, the print job pauses, the copies print, and then the print job
resumes. Copying cannot be made while printing a received fax.
Adjusting Copying Options
6-2
Document Feeder
Insert originals faceup with the top of the page
entering the feeder first. Adjust the paper guides so
they fit against the originals.
on page 6-3.
Basic Copying