Rear Door Assembly Removal And Installation; Rear End Door Assembly Components - Suzuki Grand Vitara 2011 Manual

9J-5 Hood / Fenders / Doors:
2. Door hinge
: Apply lithium grease 99000-25010 to rotating part.
: Apply sealant 99000-31110 to contact face.
3. Door open stopper

Rear Door Assembly Removal and Installation

Refer to "Front Door Assembly Removal and Installation" as removal and installation procedures are basically the
same. However, note the following.
• Tighten rear door hinge bolts and nuts to specified torque referring to "Rear Door Assembly Components".

Rear End Door Assembly Components

5
A
A
A
A
A
E
A
A A
A
A
A
A
A
1. Rear end door panel assembly
2. Rear end door window glass
3. Rear end door hinge
: Apply lithium grease 99000-25010 to door hinge
moving section.
: Apply sealant 99000-31110 to contact face.
3
6
A
A
A
E
A
(a)
A
5
5. Door open stopper bolt
6. Rear door opening weather-strip
1
3
A
4
4. Rear end door balancer
5. Rear end door trim
6. Rear end door opening wether-strip
: 23 N⋅m (2.3 kgf-m, 17.0 lb-ft)
S6JB0A9A06008
S6JB0A9A06009
2
E
I5JB0A9A0009-01
: 23 N⋅m (2.3 kgf-m, 17.0 lb-ft)