Installing - Arctic Cat 1987 AFS El Tigre Service Manual

Fig. 4·132
INSTALLING
1.
Place the clevis onto the end of the brake
cable. Then place the c levis into position on
the actuator lever and secure with a clevis pin
and cotter key .
•
CAUTION
•
Make sure clevis has free movement.
Fig. 4·133
8491
2. Position the brake cab le onto the cable
bracket so a flange nut is positioned on either
s ide of the bracket. Tighten securely.
II
NOTE: The flange nuts should be centered
on the brake cable end.
Fig. 4·134
3. Connect the return sp rin g to the cable bracket
and to the spring actuator lever.
4. Place the brake assembly and cable bracket
int o pos it ion on the cha in case. Secure
spacers and bracke t with two cap screws and
lock nuts; tighten lock nuts to 3.2 kg-m (23 ft-
Ib) .
Fig. 4·135
8479
II
NOTE: On the Liquid Cooled models the for-
ward cap screw is slightly longer_ Secure the
radiator bracket with the forward cap screw_ The
washer is positioned on the outside of the
radiator bracket.
5. Adjust the brake.
95