6
WARNING
6
At least two threads must be maintained on the
eyebolt behind the lock nut. Failure to maintain
this distance may result in personal
injury.
REAR SPRING
Rear spring tension adjustment is accomplished
by rotating the adjustment cam. Each cam is
numbered 1-4 for easy identi
f
ication
with position
4 providing
t
he stiffest ride and position 1 for the
light driver or slow speed
trail
driving. Positions 2
and 3 are for the average operator under
normal
cond itions with pos ition 3 providing the stiffer
ride.
To
rotate
the cam
,
insert the handle from the
spark-plug wrench into one of the holes
in
the ad-
justment cam
.
Rotate the handle until
the
cam is
in
the desired position. Make the adjustment on
the other cam making sure both cams are ad-
justed
equal ly.
Fig. 7·72
0727·153
•
CAUTION
•
DO NOT rotate the adjustment cam directly from
position 1 to position 4. Always adjust in
numerical sequence. Cam failure or damage may
result if the cam is rotated directly from position 1
to position
4.
161