Arctic Cat 1987 AFS El Tigre Service Manual page 77

Fig. 4·52
8362
Fig. 4·53
8363
3. Remove the cover plate and spring.
Fig. 4·54
8364
4. Using a spider removal too l, turn the spider
counterclockwise; then remove spider,
spacer rings, and movable sheave.
74
Fig. 4·55
8366
II
NOTE: Applying heat to the clutch threaded
area will aid in clutch disassembly. The heat
will loosen the LOCTITE used during assembly.
5. Using a pli ers, remove the six guide buttons.
Fig. 4·56
8367
6. Using a vise, deep socket, and a smaller
diameter press tool, press the pin and roller
out of the spider. Position a deep socket on
one side of the spider and the press pin on the
opposite side between the opened vise jaws.
Slowly close the vise and check to make sure
the deep socket and press pin are aligned.
7. Remove the three arm pins and nuts securing
the cam arms to the movable sheave; then
remove the cam arms with washers.
Fig. 4·57
8368