Installing - Arctic Cat 1987 AFS El Tigre Service Manual

5. Place the two long bolts and lock washers in-
to position and tighten securely. Tighten the
terminal nut.
Fig. 5·25
8268
6. Place the dust cover and gasket into posi t ion
and secure w ith two screws and lock wash-
ers.
Fig. 5·26
8267
112
INSTALLING
1. Place the bracket into position on the starter
motor and secure with two nuts and lock
washers.
2. Place the starter motor w/bracket in to posi -
tion and secure the bracket to the crankcase
wit h two bolts and lock washe rs.
3. Sec ure t he front cover to the magneto case
wit h two bo lts and lock washers.
4. Place the positive cable onto the terminal and
secure with a nut and lock washer.
5. Connect the battery.