Assembling - Arctic Cat 1987 AFS El Tigre Service Manual

ASSEMBLING
Fig. 4-86
\
KEY
1. Movable Sheave
2. Stationary Sheave
3. Torque Bracket
4. Lock Washer
5. Cap·Socket Screw
6. Spring
7. Retainer Bracket
8. Bearing
9. Lock Nut
10. Button
11. Washer
12. Movable Sheave Cover
13. Stationary Sheave Cover
14. Screw
1. Place the s heave covers into position on the
sheaves; then apply LOCTITE LOCK N' SEAL
to the threads of the mounting screws and
secure. Tighten the screws to 0.6-0.7 kg-m
(50-60 in.-Ib).
Fig. 4·87
8462
82
12
~ 14
0727·212
2. Install the buttons in retainer bracket.
3. Place the torque bracket into position on the
stationary sheave making sure the degree
number on the torque bracket aligns with the
part number on the stationary sheave. Install
the three cap-socket screws and lock
washers. DO NOT tighten at this time .
Fig. 4·88
AIOOl