Assembling Crankcase Half - Arctic Cat DVX 400 2008 Service Manual

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
6. Remove the remaining 5th drive washer from the
countershaft.
Assembling
1. Install the first 5th drive washer onto the counter-
shaft.
2. Install the 5th drive gear; then install the second
5th drive washer onto the countershaft. Secure
with the circlip.
3. Install the 3rd drive gear; then install the 4th drive
circlip onto the countershaft.
4. Install the 4th drive washer and 4th drive gear onto
the countershaft.
www.mymowerparts.com
Back
CC199D
CC199D
CC200D
Back to TOC
5. Install the 2nd drive gear and washer onto the
countershaft.
NOTE: The countershaft is now completely
assembled for installation.
Assembling Crankcase
Half
NOTE: For ease of assembly, install components
on the left-side crankcase half.
1. Install the left end of the crankshaft into the crank-
case using the appropriate crankshaft installer tool.
NOTE: Never fit the crankshaft into the crankcase
by striking it with a plastic mallet as the accuracy
of the crankshaft alignment may be affected.
Back to Section TOC
CC201D
3
CC204D
Next
3-31