Table of Contents
Advertisement
TeleTek
7. COMMUNICATOR TEST PARAMETERS
ADDRESS 70
SYSTEM CLOCK SETTINGS
In this address the hour and minutes are set (HH:MM). The indication is
CLOCK
hexadecimal and the digits show up one by one. The digits are monitored by the
arrow keys.
DEFAULT : 00:00 h
ADDRESS 71
TEST REPORT TIME
In this address the hour for transmission the test message to the monitoring
TEST TIME
station is chosen. Hour and minutes are set (HH:MM). Hexadecimal indication.
DEFAULT : 14:01 h
ADDRESS 72
AUTO REPORTING
In this address the period for test message transmission is set in days (DD).
TEST PERIOD
Hexadecimal indication. Two digit numbers should be used. When a period
less than 10 days is chosen the first digit should be 0.
DEFAULT : 01 day
ADDRESS 73
TEST REPORT CODE
The first symbol of the "test report" event code is set (X). The panel transmits
TEST CODE
as a second symbol a copy of the first. Hexadecimal indication.
DEFAULT : A
ADDRESS 74
LINE FAULT INDICATION DELAY
Delay time in minutes (MM) before the indication for LF is set. Hexadecimal
LF DELAY
indication. Two digit numbers should be used. When a period lesser than
10 minutes is chosen the first digit should be 0. If an indication for LF is
not necessary, 00 should be entered.
DEFAULT : 00 minutes
CA60Plus
25
Installation Manual
Hide quick links:
Advertisement
Table of Contents
