General Information
Table 11-2 Finisher Specifications
Category
Specification
Configuration
User installed option. The Finisher provides stapling (up to 50 sheets),
print job offset and stacking up to 1,000 sheets of paper. The Finisher
docks with the Printer and Stand. All Finisher operations are controlled by
the Finisher Control Board.
Paper feed
Paper leaving the Exit section of the Printer is fed to the Paper catch area
then directly into the Horizontal Transport. The Horizontal Transport then
delivers the paper to the Finisher where stapling, offsetting (jogging) and
stacking occur.
Power
The Printer provides +24 VDC to the Finisher. The Finisher's power
requirements
supply provides all required DC voltages throughout the Finisher Option.
The Phaser 7700 Light Finisher shall meet FCC part 15, subpart B, Class
A. CISPR22 Class A.
Dimensions:
.
Height
Width
Weight
Figure 11-2 Dimensions of the Finisher
Service Quick Reference Guide - Finisher
11-293