RRP 33 Exit Transport Assembly
1
Figure 7-35 Exit Transport Assembly
Removal
1.
Remove the Rear Cover (RRP 1, on page 7-140).
2.
Remove Left-Hand Top Power Switch Cover (RRP 5, on page 7-144).
3.
Remove the Fuser Front Cover (RRP 8, on page 7-148).
4.
Open left-hand cover.
5.
Remove the one screw securing the Transport Assembly Cover and remove the
cover.
6.
Disconnect the harnesses to the Transport Assembly and the left-hand cover
interlock connector.
7.
Remove the three screws securing the Transport Assembly and remove.
7-178
Phaser 7700 Color Laser Printer
S7700-084