Xerox Phaser 7700 Service Manual page 204

Removal
1. Open the right cover door.
2. Open the front cover and lower the main lever.
3.
Lift the Accumulator Belt locking lever and pull the assembly out of the
printer. You need to hold the locking lever up until the white nylon handle is
exposed.
Caution The Accumulator Belt assembly is heavy. Use the white nylon
handle when removing the assembly from the printer. Do not get
fingerprints on the belt.
Note Metal tabs allow the Accumulator Belt to be laid on a flat surface.
It can also be carried by the black handle located on the side.
Replacement
Note
When reinstalling the Accumulator Belt assembly the black
handle faces the front of the printer.
Caution
Ensure that the Accumulator Belt is fully inserted or severe
printer damage will result.
LEVER!
Service Quick Reference Guide - Removal & Replacement Procedures
NEVER FORCE THE MAIN
7-181