RRP 3 Top Cover Assembly
.
Figure 7-3 Top Cover Assembly
Removal
1.
Remove the Right Side Cover Assembly (RRP 2, on page 7-141).
2.
Remove the two screws visible on the right side of the Top Cover.
3.
Open the Front Cover and remove the front screw holding the Top Cover.
4.
Open the Image Processor Board Cover to gain access to the 4 thumb screws
that secure the Image Processor Board metal cover.
5.
Remove the Image Processor Board metal cover.
6.
Disconnect the front panel cable from the Relay Board P564.
7.
Remove the Top Cover.
7-142
Phaser 7700 Color Laser Printer