Xerox Phaser 7700 Service Manual page 65

Table 3-2 Service Diagnostics Test Menu Functions (cont'd.)
Test Front Panel Display
Print Cartridge To avoid damaging the
Motor Accumulator Belt, remove!
Do you wish to continue?
Yes
No
Motor On
Motor Off
Please cycle power to printer
now!
Accum Belt To avoid damaging the
Motor Accumulator Belt, remove!
Do you wish to continue?
Yes
No
Motor On
Motor Off
Please cycle power to printer
now!
2nd BTR 2nd BTR Motor is Retract
Motor
This test toggles between the
two values of Retract and
Contact.
Motor Off
Duplex Motor Duplex motor is On
Turn Motor On (Low Speed)
Turn Motor On (High Speed)
All Motors Off
Paper Feed Feed Motor: 1
Motors 2
3
4
Paper Lift Lift Motor: 1
Motors 2
3
4
Offset Motor Direction: Forward
Developer Developer Motor is On
Motor Turn Motor Off
All Motors Off
Dispenser Disp. Motor: Yellow
Motors Magenta
Cyan
Black
2-42
Phaser 7700 Color Printer
Test Operation, Results and
Function
Definition
Caution
Caution
Note
Press Up/Down to change setting.
Running this test causes a static jam.
Clear paper path after running this
test.
Press Up/Down to change setting.
Press Up/Down to change setting.
Backward
CMY only
Caution
Only run this test once
per power cycle to avoid
excessive toner forced
inside the developer and
destroying it.
To avoid damaging the
Accumulator Belt, it is
recommended that you
leave the belt installed
and perform the Belt
Edge Learn test instead,
Step 1: Belt Edge Learn
on page 4-119
This test needs to be run
twice to return the motor
to a retracted position.
Only run this test once
per power cycle to avoid
excessive toner forced
inside the developer and
destroying it.