Xerox Phaser 7700 Service Manual page 64

Table 3-2 Service Diagnostics Test Menu Functions (cont'd.)
Test Front Panel Display
Finisher Sensors Interlocks
Left-Hand Cover is L
Top Cover is L
Docking is H
Horiz. Transport is L
Horizontal Transport
Entry is L
Exit is L
IOT Full is H
Compiler
Tray Exit is L
Paper is L
Cover Safety Switch is L
Stacker
No Paper is L
Height is H
Upper Limit is L
Stack A is L
Stack B is L
Tamper
Rear Home is L
Front Home is H
Stapler
Head Home is L
Low is L
Ready is L
Move is L
Front Corner is H
Miscellaneous
IOT Reg. Clutch is H
Eject Home is L
Set Clamp Home is L
Decurler Cam Position L
Motors/Fans Tests
Tests the operation of motors by running one or more motor tests at a time.
Main Motor Main Motor is On
Turn Motor Off
All Motors Off
Steering Motor To avoid damaging the
Accumulator Belt, remove!
Do you wish to continue?
Yes
No
Motor On
Motor Off
Please cycle power to the
printer now!
Service Quick Reference Guide - Diagnostics, Error Codes & Messages
Test Operation, Results and
Function
Definition
Optional - only if Finisher is installed
H = Open, actuated or paper present
L = Closed, deactuated or no paper
present
Engineering use only
Engineering use only
Engineering use only
Engineering use only
This test produces gear hopping
noise unless you perform the 2nd
BTR retract motor test.
Caution: To avoid damaging the
Accumulator Belt, it is recommended
that you leave the belt installed and
perform the Belt Edge Learn test
instead, Step 1: Belt Edge Learn on
page 4-119
Bypass the right-hand door interlock
switch and observe the steering
motor as the test is performed.
2-41