Figure 7-58 Main Lever, Right-Hand And Left-Hand Jacks; Rrp 55 Main Lever Assembly Right And Left-Hand Jacks - Xerox Phaser 7700 Service Manual

RRP 55 Main Lever Assembly
Right and Left-Hand Jacks

Figure 7-58 Main Lever, Right-Hand and Left-Hand Jacks

Removal - Main Lever Assembly
1.
Remove the Accumulator Belt Assembly (RRP 35, on page 7-180).
2.
Remove the Print Cartridges and protect from the light.
3.
Remove the Front Cover Assembly (RRP 7, on page 7-147).
4.
Remove Fuser Front Cover (RRP 8, on page 7-148).
5.
Remove Waste Cartridge Cover (RRP 23, on page 7-164).
6.
Remove the Left-Hand Cover (RRP 6, on page 7-146).
7.
Lower the Main Lever Assembly to fully horizontal.
8.
Remove the e-clip and remove the RH Handle Pivot Pin.
9.
Remove the screw and washer and remove the RH Handle Pivot Pin.
10.
Remove the Main Lever Assembly.
Removal - RH Jack Assembly
Caution Ensure that the Lift Frame Assembly is fully lifted and the RH
and LH Lift Jack Assembly racks are even.
1. Hold the Main Lever in a horizontal position.
2. Slide the Main Lever gears under the Lift Jack Assembly racks and lift into
position.
3. Insert the clevis pins.
7-204 Phaser 7700 Color Laser Printer
S7700-455