Finisher Specifications
Category
Configuration
Paper feed
Power
requirements
Dimensions:
shown in mm.
Media Types
Media Weight
Specification
User installed option. The finisher provides stapling (up to 50 sheets), print
job offset and stacking up to 1,000 sheets of paper. The finisher docks with
the printer and stand. All finisher operations are controlled by the finisher
control board.
Paper leaving the exit section of the printer is fed to the paper catch area
then directly into the horizontal transport. The horizontal transport then
delivers the paper to the finisher where stapling, offsetting (jogging) and
stacking occur.
The printer provides +24 VDC to the finisher. The finisher's power supply
provides all required DC voltages throughout the finisher option.
The Phaser 7750 Light Finisher shall meet FCC part 15, subpart B, Class
A. CISPR22 Class A.
Long-Edge Feed (LEF)
B5
A4
Letter
2
64 - 105 g/m
(Thick/Thin paper)
Short-Edge Feed (SEF)
8" x 10"
Letter
US Folio
Legal
Tabloid
A3
A4
B4
11-3