Phaser 7700 Printer Overview - Xerox Phaser 7700 Service Manual

Phaser 7700 Printer overview

The Phaser 7700 Color Printer combines a single-pass, tandem-design, color laser,
continuous-tone print engine with an image processor supporting Adobe's
PostScript 3 description language. The image processor features a bi-directional
parallel interface, a USB port, and a 100baseT Ethernet port for host
communication. The PCL5C printer language is also supported.
The 7700 printer prints at a standard resolution of 600 x 1200 dots-per-inch with
bi-level dots and at a high resolution of 600 x 600 dots-per-inch with variable dot
sizing. The printer can print up to 22 A/A4-size pages per minute.
All printers feature an Internal Hard Drive for font storage, storing print files,
print collation support, and a "check print before proceeding" mode. The hard
drive also contains printer documentation accessible via a web browser. The
printer contains 136 standard, built-in fonts.
All printers feature a built-in duplex unit, which supports printing on both sides
of a sheet of paper.
The printer features a built-in, 100-sheet multi-purpose tray from which specialty
media, card stock, larger format paper, and envelopes can be fed. The printer also
supports manual feeding using the Multi-Purpose Tray.
The Lower Tray Assembly is available with three additional 500-sheet universal
media trays. A High-Capacity Feeder is also available which features two
high-capacity A/A4-size trays and one 500-sheet universal tray. An optional
1000-sheet, high-capacity stapler/stacker is available with the Lower Tray Deck
or High-Capacity Feeder. The printer is marketed in three versions:
The Phaser 7700 DN Printer comes standard with 128 Mbytes of RAM.
The Phaser 7700 GX Printer features 256 Mbytes of RAM, a three-tray
Lower Tray Deck, and PhaserMatch 7700 ICC Color Matching Software.
The Phaser 7700 DX Printer features 256 Mbytes of RAM, a
High-Capacity Feeder and Finisher.
RAM memory in the printers can be supplemented with one additional 64-, 128-
or 256-Mbyte RAM SODIMMs; the maximum usable capacity is 512 Mbytes in the
printer's two memory slots
After being idle for the selected amount of time the printer switches into its
TAR TM
E S mode where it consumes less than 45 watts of power. It
NERGY
"awakens" upon receiving data at any of its ports.
1-2 Phaser 7700 Color Laser Printer