RRP 51 Accumulator Belt Drive Assembly
Figure 7-54 Accumulator Belt Drive Assembly
Removal
1.
Remove the Rear Cover and Shield (RRP 9, on page 7-149).
2.
Lower the T1 and T3 power supply to horizontal (RRP 44, on page 7-192).
3.
Remove any components covering the motor which is mounted to the frame at
the rear, top left corner.
4.
Remove the three screws that secures the motor and bracket assembly to the
frame and remove the assembly.
7-200
Phaser 7700 Color Laser Printer
S7700-007