Xerox Phaser 7700 Service Manual page 157

Resetting network setup values to default
Resetting the network setup values resets the TCP/IP address, TCP/IP address
menu settings (gateway, broadcast, etc.), CentreWare IS, EtherTalk, Netware, set
IPX frame type, IPP and Ethernet speed to their default values.
1.
From the Main Menu, highlight Network Setup Menu and press OK.
2.
Highlight Reset Network Setup and press OK.
3.
Reset Network Setup NOW is displayed, press OK.
Resetting Accumulator Belt life
Resetting the Accumulator Belt life is to be performed only if the Accumulator
Belt Assembly was defective and or the assembly is replaced before an end-of-life
or near end-of-life message. Do not to extend the life of the assembly. Doing so
may cause premature failure of other internal printer components.
The printer prompts the user to reset the life counts if the assembly is replaced
after receiving a Replace Accumulator Belt Assembly or Replace Accumulator
Belt Assembly Soon message.
1. From the Main Menu, highlight Supplies Info Menu and press OK.
2. Highlight Reset Accumulator Belt Life and press OK.
3. Reset Accumulator Belt Life NOW is displayed, press OK to reset the
Accumulator Belt life.
Resetting belt cleaner assembly life
Resetting the belt cleaner life is to be performed only if the Belt Cleaner Assembly
was defective and or the assembly is replaced before an end-of-life or near end-of-
life message. Do not to extend the life of the assembly. Doing so may cause
premature failure of other internal printer components.
The printer prompts the user to reset the life counts if the assembly is replaced
after receiving a Replace Belt Cleaner Assembly or Replace Belt Cleaner
Assembly Soon message.
1. From the Main Menu, highlight Supplies Info Menu and press OK.
2. Highlight Reset Belt Cleaner Life and press OK.
3. Reset Cleaner Life NOW is displayed, press OK to reset the Accumulator Belt
life.
Resetting transfer roller life
Resetting the transfer roller life is to be performed only if the Transfer Roller
Assembly was defective and or the assembly is replaced before an end-of-life or
near end-of-life message. Do not to extend the life of the assembly. Doing so may
cause premature failure of other internal printer components.
The printer prompts the user to reset the life counts if the assembly is replaced
after receiving a Replace Transfer Roller or Replace Transfer Roller Soon message.
1.
From the Main Menu, highlight Supplies Info Menu and press OK.
2.
Highlight Reset Transfer Roller Life and press OK.
3.
Reset Transfer Roller Life NOW is displayed, press OK to reset the
Accumulator Belt life.
6-134 Phaser 7700 Color Laser Printer