RRP 54 Tray 1 Paper-Select Switches
Figure 7-57 Tray 1 Paper-Select Switches
1.
Remove the T1 and T3 high-voltage power supply (RRP 44, on page 7-192).
1.
Remove the 3.3 VDC and 5 VDC low-voltage power supply (RRP 45, on page
7-194).
2.
Disconnect the wiring harness from the tray 1 paper-select switches.
3.
Remove the two screws that secure the mounting bracket to the printer frame
and remove the switch.
Service Quick Reference Guide - Removal & Replacement Procedures
S7700-442
7-203