RRP 28 New Developer Housing Assembly
Charging
Figure 7-30 Developer Housing Assembly Recharge
Recharging a Developer Housing Assembly
Caution
If replacing a Developer Housing Assembly, write down the new
ATC tag number. Remove the tear-off ATC tag number label, and
adhere it to the appropriate print cartridge connector on the print
cartridge plate assembly, then perform the procedure. See ATC
Sensor Setup on page 4-127.
Note
It is easy to spill toner in this procedure. Use only a type II toner
vacuum to clean up any spilled toner.
7-172
Phaser 7700 Color Laser Printer