User Safety Summary - Xerox Phaser 7700 Service Manual

User safety summary

Terms in manual: Various terms are used throughout this manual to either provide
additional information on a specific topic or to warn of possible danger that might
be present during a procedure or action. Be aware of all symbols and terms when
they are used, and always read
NOTE: A NOTE may indicate an operating or maintenance
procedure, practice or condition that is necessary to
efficiently accomplish a task.
A NOTE may also provide additional information related
to a specific subject or add a comment on the results
achieved through a previous action.
CAUTION: A CAUTION indicates an operating or maintenance
procedure, practice or condition that, if not strictly
observed, could result in damage to, or destruction of,
equipment.
WARNING: A WARNING indicates an operating, or maintenance
procedure, practice or condition that, if not strictly
observed, could result in injury or loss of life.
Terms on product:
CAUTION: A personal injury hazard exists that may not be apparent.
For example, a panel may cover the hazardous area.
DANGER: A personal injury hazard exists in the area where you see
the sign.
Power source: For 110 VAC printers, Do not apply more than 127 volts RMS
between the supply conductors or between either supply conductor and ground.
Use only the specified power cord and connector. For 220 VAC printers, do not
apply more than 240 volts RMS between the supply conductors or between either
supply conductor and ground. Use only the specified power cord and connector.
Refer to a qualified service technician for changes to the cord or connector.
WARNING:
If the product loses the ground connection, usage of controls and
other conductive parts can cause an electrical shock.
NOTE , CAUTION and WARNING messages.