RRP 48 T2 High-Voltage Power Supply
Figure 7-51 T2 High-Voltage Power Supply
Removal
1.
Remove the 24 VDC Power Supply and Bracket (RRP 11, on page 7-151).
2.
Disconnet the high-voltage wires from the KCMY connectors.
3.
Disconnect the wiring harness from J575 and J576.
4.
Remove the two screws that secure the 1
5.
Remove the T2 high-voltage power supply.
Service Quick Reference Guide - Removal & Replacement Procedures
st
BTR assembly to the printer frame.
7-197