Figure 7-49 Ld Power Relay; Rrp 46 Ld Power Relay - Xerox Phaser 7700 Service Manual

RRP 46 LD Power Relay

Fig. 1
Fig. 2

Figure 7-49 LD Power Relay

Removal
1. Remove rear cover and shield (RRP 9, on page 7-149).
2. Disconnect the wiring harness.
3. Remove the two screws securing the LD power assembly.
4. Remove the LD power assembly.
Service Quick Reference Guide - Removal & Replacement Procedures
S7700-431
7-195