Xerox Phaser 7700 Service Manual page 67

Table 3-2 Service Diagnostics Test Menu Functions (cont'd.)
Test Front Panel Display
Take-Away Clutch On
Clutch Clutch Off
Developer Clutch On
Clutch Clutch Off
Registration Clutch On
Clutch Clutch Off
Duplex Clutch Which Direction?
CCW
CW
Clutch On
Clutch Off
MPT Feed Clutch
Finisher Clutches Decurler Cam Clutch
Clutch On
Clutch Off
Solenoid Tests
Tests functionality of the solenoids by activation one solenoid at a time.
Exit Gate Solenoid Solenoid On
Solenoid Off
Duplex Gate Solenoid On
Solenoid Solenoid Off
Shutter Solenoid Solenoid On
Solenoid Off
ADC Shutter Open Solenoid On
Solenoid Off
ADC Shutter Close Solenoid On
Solenoid Off
MPT Feed Solenoid Solenoid On
Solenoid Off
Finisher Solenoids Set Clamp Paddle
HTrans Gate In Open
HTrans Gate In Close
Adjustments/ Calibrations
Performs adjustments, calibrations and operations essential to the performance of the printer.
For details on performing the RegiCon procedures, Registration Control Procedures on
page 4-117
Belt Edge Learn
RegiCon 685 Setup
Cycle
2-44
Phaser 7700 Color Printer
Test Operation, Results and
Function
Definition
All tests are activated by pressing
OK.
Listen for the clutch.
Test times out after 1 second.
Engineering use only
Engineering use only
Press OK to run test.
ADC = Automatic Density Correction
Press OK to run test.
ADC = Automatic Density Correction
Press OK to run test.
MPT = Multi-Purpose Tray
Press OK to run test.
Press OK to run test.
Refer to (Processes of the RegiCon
adjustment on page 4-117).
Refer to (Processes of the RegiCon
adjustment on page 4-117).