Canon iR5055 Series Service Manual page 420

Chapter 12
Error string
17 E-RDS switch is set OFF
18 Server schedule is not exist
19 Network is not ready, try later You execute the communication when the connection to the
20 URL error
[Method name]:
Method name
1 postServiceModeCount
2 postModeCount
3 postPartsCount
4 postFirmwareInfo
5 getOperationList
6 postOperationOutcome
7 postConfiguration
8 postGlobalClickCount
9 postJamLog
10 postServiceCallLog
11 postAlert
12 postDebugLog
13 getConfiguration
14 communicationTest
[Server side detailed error]:
Detailed error information returned from UGW is displayed for "Server response error".
However, only the first 128 characters are displayed by the entire error information.
Nothing is displayed here at other errors.
12-8
Cause
You execute the communication test while the E-RDS switch is
OFF.
The e-RDS receives empty schedule data from UGW.
network has not been established.
(The network connection might not be established from the start-
up of the device for 60 seconds.)
Illegal URL (Syntax error etc.)
Meaning
Account counter acquisition phase
Mode counter acquisition phase
Parts counter acquisition phase
ROM version acquisition phase
Check/acquisition phase whether the information file for me is in UGW.
Phase in which E-RDS configuration is transmitted to UGW
Counter acquisition phase
Jam notification acquisition phase
Error notification acquisition phase
Alert notification acquisition phase
Log acquisition phase
Information acquisition phase (Schedule transmission etc.)
Communication test phase
Counter Measure
Turn ON E-RDS switch, and execute the communication
test.
Check setting file. (Call the help desk of UGW.)
Confirm that the network connection has been established.
Moreover, execute again after enough waiting.
Correct URL.
T-12-1