Power Save Mode; Sleep Mode; Copying/Printing Mode - Canon iR5055 Series Service Manual

- If the environment temperature is 17 deg C or higher,
MEMO:
The time that passes from a shift to standby mode is monitored continuously while a copy/print job is under way, and is used for temperature control for copying/
printing. (See the descriptions under "Copying/Printing Mode.")

9.2.7 Power Save Mode

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
<Characteristics>
- The machine uses the appropriate target temperature for the fixing roller to suit the selected rate of power saving (in user mode).
- The machine uses the appropriate target temperature for the fixing roller to suit the selected rate of power saving (in user mode).
Rate of saving
-10% (default)
-25%
-50%

9.2.8 Sleep Mode

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
<Characteristics>
- The power to the fixing assembly is cut.
- When the sleep mode is disabled, the machine shifts to standby mode through the start-up mode effective at time of power-on (30-sec start-up, low-temperature
environment start-up, high-humidify start-up, recovery).

9.2.9 Copying/Printing Mode

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
<Characteristics>
- The target temperature used while copying/printing is under way is +2 deg C in relation to the temperature used for standby.
- If the environment temperature is lower than 17 deg C
STANDBY
(deg c)
215
210
205
200
195
190
185
180
175
0
0 180
STANDBY
(deg c)
215
210
205
200
195
190
185
180
175
0
0 60
Standard temperature
170 deg C
160 deg C
140 deg C
360 540 720
F-9-10
120 180 240
F-9-11
T-9-5
Time length to standby
4 sec or less
6 sec or less
8 sec or less
900 1080
(sec)
300 360
(sec)
Chapter 9
0015-4593
0015-4594
0015-4596
9-7