Place A Video Call; Swap Video; Display Video Calls In Full Screen - Polycom VVX 201 User Manual

Place a Video Call

If your phone is set to transmit video automatically for calls, then your video stream is sent for all calls placed
on your phone. If your phone is set to place audio-only calls by default, you can start sending video during
an active call.
During a video call, including a conference call, a Video soft key is displayed. You can select this soft key
to access video functions that can stop video transmission, display video in full screen, and swap the
windows in which the video is displayed.
T
ASK
1 Tap New Call, enter a number or select a contact, and tap
2 After your contact answers, press the Video or Start Video soft key.
Your camera transmits video to your contact. On phones with the VVX camera, the LED light is green
when video is transmitting.
R :
ELATED INFORMATION
Changing Video Call Settings
Call Charges for Outgoing Calls

Swap Video

You can switch the locations of your video and the far-side video. If you do this, your PIP is displayed in the
Active Call screen, and the far-end video, previously displayed in the Active Call screen, is displayed in the
PIP location. When you swap video so that your video is displayed in the Active Call screen, rather than in
the PIP, the message "Local camera" is displayed next to your video.
» During a video call, do one of the following:
 Tap Video > Swap.
 Tap the PIP.

Display Video Calls in Full Screen

You can display the far-side video on the full screen, and your PIP continues to display in the corner with
the soft keys hidden. In full screen, call details display along the bottom of the screen, including an icon that
you can select to exit full screen mode. The following figure displays full screen video on the VVX 600
phone.
Polycom, Inc.
(Adapted by Atlantic Broadband)
or Send.
Video Calls
58