Changing Video Call Settings; Set The Call Rate For Video Calls; Stop Video For All Calls - Polycom VVX 201 User Manual

VVX Camera Messages (continued)
VVX Camera attached. Video available when next idle.
VVX Camera removed.
VVX Camera is not connected
R :
ELATED INFORMATION
Icons and Status Indicators

Changing Video Call Settings

When you update video settings, you change the way all video calls display on your VVX 500 and 600
phone. If you update settings during a call, the new settings apply to the next call and not the current call.
R :
ELATED INFORMATION
Tips for Video Calls
Change Video Clarity
Place a Video Call

Set the Call Rate for Video Calls

You can set the maximum call rate to use for a video call. The call rate you select applies to your next video
call. Your system administrator can set a maximum call rate for video calls. If your system administrator sets
a call rate limit, you cannot select a call rate above this limit.
T
ASK
1 Navigate to Settings > Basic > Call Rate.
2 From the Call Rate screen, select the maximum call rate you want to use for video calls.
You can choose a call rate between 128 kbps and 768 kbps. The default setting is 512 kbps.

Stop Video for All Calls

You can stop your phone from automatically transmitting your video at the start of all calls by disabling the
Auto Start Video Tx setting. The default setting is enabled, which automatically transmits video at the start
of every call.
Note: Stopping video doesn't create an audio-only call. Even if you stop video, video information is still
transmitted to the far side as a still picture, and the call is still a video call.
Polycom, Inc.
(Adapted by Atlantic Broadband)
Indicates that your camera is ready to use for your next
video call.
Indicates that you have detached your camera from
your phone.
Indicates that a VVX Camera is not attached to your
phone, but you are accessing a feature or function that
requires that the camera be attached.
Video Calls
53