Removing And Installing Brake Pedal (Lhd Vehicles) - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
Brake system - Edition 03.2013
5.2 Removing and installing brake pedal
(LHD vehicles)
Removing
– Remove driver's footwell cover ⇒ Rep. gr. 68 ; General body
repairs, interior .
– Remove brake light switch
– Separate brake pedal from brake servo
– Unscrew hexagon bolt.
– Remove brake pedal.
Installing
Installation is carried out in the reverse sequence, when doing this
note the following:
Attaching brake pedal to brake servo
– Hold ball head of push rod in front of mounting and push brake
pedal towards brake servo so that ball head audibly locks into
place.
– Adjust brake light switch/brake pedal switch
Caution
Before driving vehicle for the first time, make sure function of
brakes is OK.
76
Rep. gr.46 - Brakes - mechanism
⇒ page 34 .
⇒ page 74
⇒ page 34
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
.
.