Audi A8 2003 Workshop Manual page 43

– Unscrew brake pressure sender -4-.
Installing
Remaining installation steps are carried out in reverse sequence.
– Bleed brake system
– Perform ESP road test ⇒ vehicle diagnostic, testing and in‐
formation system VAS 505x in the function "Guided Fault
Finding" .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ page 110 .
Audi A8 2003 ➤
Brake system - Edition 03.2013
5. Removing and installing parts of ESP system
37