Removing And Installing Mounting Bracket - Audi A8 2003 Workshop Manual

6 Removing and installing mounting
bracket
6.1 Removing and installing mounting
bracket
Removing
⇒ Rep. gr. 92 ; Servicing windscreen wiper system; Removing
and installing wiper system
– Remove driver's storage compartment. ⇒ Body Repairs; Rep.
gr. 68
– Removing and installing brake servo
– Remove brake light switch
– Separate brake pedal from brake servo
– Remove bolt connections -1-.
– Item -2- Mounting bracket
– Item -3- Bulkhead
Remove accelerator pedal
– Unscrew hexagon socket head bolts
Removing brake pedal mounting bracket
– Remove Torx socket head bolt -T45-
4.
Installing
Installation is carried out in the reverse sequence, when doing this
note the following:
Attaching brake pedal to brake servo
– Hold ball head of push rod in front of mounting and push brake
pedal in direction of brake servo so that the ball head audibly
locks into place ⇒ page 75
– Adjust brake light switch/brake pedal switch
– Bleed brake system
Caution
Before driving vehicle for the first time, make sure function of
brakes is OK.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ page 117
⇒ page 34 .
⇒ page 74
⇒ Item 7 (page 74)
⇒ Item 5 (page 74)
.
⇒ page 110 .
Brake system - Edition 03.2013
.
.
.
- item
⇒ page 34 .

6. Removing and installing mounting bracket

Audi A8 2003 ➤
77