Removing And Installing Brake Master Cylinder - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
Brake system - Edition 03.2013
9 Removing and installing brake mas‐
ter cylinder
9.1 Removing and installing brake master
cylinder
Special tools and workshop equipment required
♦ Brake filling and bleeding equipment -VAS 5234-
or
♦ Brake filling and bleeding equipment -V.A.G 1869 A-
♦ Sealing plugs repair kit, part No. 1H0 698 311A
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
Removing
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Detach plenum chamber cover.
Drawing off brake fluid with brake filling and bleeding equipment
-V.A.G 1869- or VAS 5234.
– Open brake fluid reservoir.
– As protection against escaping brake fluid, place a sufficient
number of lint-free cloths in area beneath brake master cylin‐
der.
114
Rep. gr.47 - Brakes - hydraulics