10
Removing and installing brake servo
10.1
Removing and installing brake servo
Special tools and workshop equipment required
♦ Brake filling and bleeding equipment -VAS 5234-
or
♦ Brake filling and bleeding equipment -V.A.G 1869 A-
♦ Sealing plugs repair kit, part No. 1H0 698 311A
Removing
– Remove storage compartment on driver's side ⇒ Body Re‐
pairs; Rep. gr. 68
– Detach plenum chamber cover.
Drawing off brake fluid with brake filling and bleeding equipment
-V.A.G 1869- or VAS 5234.
– Open brake fluid reservoir.
– As protection against escaping brake fluid, place a sufficient
number of lint-free cloths in area beneath brake master cylin‐
der.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A8 2003 ➤
Brake system - Edition 03.2013
10. Removing and installing brake servo
117