Removing And Installing Pistons For Front Brake Caliper - Audi A8 2003 Workshop Manual

15 - Brake line
❑ Screw into brake caliper housing
❑ Screw into brake hose, counter hold on brake hose hexagon.
❑ Do not twist hose when fitting
❑ Ensure that lugs are properly seated in grooves in bracket.
16 - Bracket for brake line
❑ Bolt to brake caliper housing
❑ Attach brake line
17 - Brake pipe in brake caliper
❑ Tightening torque: 19 Nm
Note
Brake pipe in brake caliper:
♦
19 Nm
Brake line connection at brake
♦
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
pipe: 12 Nm
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
18 - Bolt for guide pin
❑ Tightening torque: 30 Nm
19 - Damper spring
❑ 2 fitted on each brake caliper
❑ Detaching and attaching
5.2 Removing and installing pistons for front
brake caliper
Special tools and workshop equipment required
♦ Removal wedge - 3409-
♦ Piston resetting appliance - T10145-
⇒ page 57
Audi A8 2003 ➤
Brake system - Edition 03.2013
5. Brake caliper (ceramic brakes)
97