Audi A8 2003 Workshop Manual page 78

Audi A8 2003 ➤
Brake system - Edition 03.2013
Display on VAS 505x:
♦ Request to enter a display group in display zone -1-.
♦ Display zone -2- shows a keypad.
– Enter "06" or "006" as display group number via the keypad
-2- and confirm entry with "Q key" (moves piston to original
position).
– Press left button to exit from basic setting mode.
arrow
When installing new brake pads:
Display on VAS 505x:
♦ The prompt to enter a display group appears in display zone
-1-.
♦ Display zone -2- shows a keypad.
– Press left arrow button twice.
Display on VAS 505x:
– Select function "10 - Adaption".
– Measure the thickness of the thinner of the two brake pads
(without backplate) and enter the value via the keypad or scroll
bar.
– Select keypad or enter via scroll bar.
– Enter value between 10 - 23 mm via keypad -2-.
– Confirm by pressing
– Select Save and then Accept.
When re-installing old brake pads (different procedure):
72
Rep. gr.46 - Brakes - mechanism
key (moves piston to original position).
Q
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.