Flanging Tool - Exploded View; Instructions For Use - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
Brake system - Edition 03.2013
14.1

Flanging tool - exploded view

1 - Top section of flanging tool
❑ Unscrew this part to
change jaws of flanging
tool
2 - Mounting for handle
❑ Must be removed for ac‐
cess to retaining screw
for top section of tool
3 - Retaining screw
❑ For top section of flang‐
ing tool
4 - Grub screws for jaws
❑ These screws centralise
and secure jaws of
flanging tool
❑ 2 mm socket head
5 - Jaws for flanging tool
❑ Different versions avail‐
able
❑ Assembly instructions
⇒ page 140
Assembly instructions for jaws of flanging tool:
♦ VAS 6056/6 (dark) for black brake lines
♦ VAS 6056/7 (light) for green brake lines
Note
The arrow on the rounded end of the jaws must face the end of
the housing and the straight end of the jaws must face the spindle,
otherwise the flanged connection on the brake line will not be
formed correctly.
14.2

Instructions for use

Applies to steel and ceramic brakes.
– Unscrew defective brake line at brake caliper or wheel brake
cylinder. Catch escaping brake fluid and dispose of fluid in the
correct manner.
140
Rep. gr.47 - Brakes - hydraulics
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.