Audi A8 2003 Workshop Manual page 55

– Secure brake disc with one wheel bolt see -arrow-.
– Lever brake pad retaining spring out of brake caliper housing
with a screwdriver and remove.
Note
Spring is under tension, so protect yourself by holding a glove or
cloth in front of spring.
– Unplug connector for brake pad wear indicator as shown in
illustration.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Turn connector 90° while using a screwdriver to release con‐
nector from bracket.
– Pull connector upwards out of bracket and detach wire.
Audi A8 2003 ➤
Brake system - Edition 03.2013
2. Front brakes (PR 1LJ, 1LL, 1LM, 1LK)
49