Audi A8 2003 Workshop Manual page 48

Audi A8 2003 ➤
Brake system - Edition 03.2013
– Secure brake disc with one wheel bolt see -arrow-.
– Lever brake pad retaining spring out of brake caliper housing
with a screwdriver and remove.
– Unplug connector for brake pad wear indicator.
– Turn connector 90° while using a screwdriver to release con‐
nector from bracket.
– Pull connector upwards out of bracket and detach wire.
– Detach brake line from bracket.
42
Rep. gr.46 - Brakes - mechanism
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.